ClicSeam™ Safety and Installation Manual
7
•
DO NOT leave the Product unsecured. If it falls, the glass layer could break.
The Product with a broken glass layer cannot be repaired and must not be installed.
•
DO NOT apply paint or adhesive to the Product surface or attempt to remove any
markings, labels or parts attached to the Product by the manufacturer.
•
DO NOT drill holes in the PV layer of the Product.
•
Always mount the Product so that the junction box is unobstructed and does not carry
any of the weight of the Product.
•
Avoid stepping or placing heavy load on the modules during the installation.
Doing so may cause microcracks/cracks that are invisible to human eye.
Fire Safety
Consult your local authority for guidelines and requirements for building or structural
fire safety.
Roofit
.solar Products have been tested according to the Fire Test in IEC 61730
Part 2 and classified as Class A. Also,
Roofit
.solar Products have been tested according to
CEN/TS 1187 and labelled as Broof (t2) in accordance with EN 13501-5:2016. In addition,
the metal sheet has been tested according to the EN 14782:2006 Self-supporting metal
sheet for roofing, external cladding, and internal lining. Roof constructions and installa-
tions may affect the fire safety of buildings. Improper installation may lead to hazards in
the event of a fire. Use appropriate components such as fuses and grounding connectors
as required by the local authorities.
Inform firefighters about the existence of a photo-
voltaic system in the building.
In case of fire, stay away from all elements of the PV
system, until the area is safe.
