ClicSeam™ Safety and Installation Manual
19
ClicSeam™
Edge panel
installation
1. ClicSeam™ Eaves flashing
2. ClicSeam™ Edge panel - Standard 150 mm / Available custom made
3. Fastening clip edge
Edge panel is installed a minimum of 30 mm from the batten edge by sliding the end-
bent side under the eaves flashing. Note that fastening clips are to be mounted in each
batten with a minimum of 1 screw per clip.
When the second edge panel is installed, ensure a minimum of 150 mm overlap. Cut the
seam seam of the first edge panel in the overlapping area using a metal cutter. Add
silicone sealant in the overlapping area and press the second edge panel over the first
one.
Metal worker completes the connection between the edge panel and gable board / other
type of steel-plate installation.
≥
30 mm
1
3
2
