www.
roodog
.co.uk | 9
Battery Charging & Removal Continued
Replacement
To replace the battery it is imperative you line up the grooves on the battery casing with the
locating plate. If you Fail to do this unnecessary damage can be caused when later trying to
remove it. Also the battery will not fit correctly at the connection end.
✗
Do Not: force the battery in
and out if it is stiff to do so.
When fitted correctly it
should slide in and out easily.
✓
Once the battery is located correctly slide it all the way down
until it stops. If fitted correctly the battery should slide all the
way in with out the need for excessive force being required.
Push the lock back in and your ready to go riding. Check the
pin underneath the plate to make sure it has located.
