Ronde & Schwarz R&S TSMA6B-BP, Getting Started

Page: 23 / 37

Preparing for Use
R&S
®
TSMA6B-BP
23 Getting Started 4900.9060.02 ─ 01
1 = R&S TSMA6B-BP
2 = Collar screws
3 = R&S TSME6
4 = Snap-in holes on the bottom pane of R&S TSME6 and R&S TSMExxDC
5 = R&S TSMExxDC
3. Connect DC power cable R&S TSMA6-BPP1 resp. R&S TSMA6-BP2T from
AUX1 / AUX2 to the DC IN socket of the devices (see Figure 4-13 ).
Setup with TSMA6B-BP + 2 x TSME6 + TSMExxDC
Figure 4-13: TSMA6B-BP + 2 x TSME6 + TSMExxDC
To connect 3 and 4 R&S TSME6/TSMExxDC devices, proceed as follows.
1. Mount the devices 1 and 2 according to steps described in Chapter 4.5, "Con-
necting R&S TSMA6B-BP with R&S TSME6 and R&S TSMExxDC" ,
on page 17.
2. For the devices 3 and 4, screw the additional collar screws on top of the
already mounted devices.
Connecting the R&S TSMA6B-BP with Multiple Devices