Operation
Operating the System
49
CLIPSTER | Hardware Guide | Hardware Generation V+
Rohde & Schwarz DVS GmbH
Operating the System
This chapter describes how to operate the CLIPSTER hardware,
i.e. it is explained how to start the system and how to shut it
down. For both procedures you have to use the power switch of
the operation items at the front of the system.
The following topics are covered:
■
■
Shutting Down the System (page 50)
Starting the System
After a proper installation of the system you may start the
R&S DVS system at any time.
Perform the following steps:
•
Press the power switch briefly to turn on the system.
The system will be started and the R&S logo in the middle of
the faceplate lights up. As with any standard computer after
initial booting, the system begins to load the installed oper-
ating system. When the operating system has finished its
loading, you can begin to work with the R&S DVSsystem
right away.