Operation
Operating the System
50
CLIPSTER | Hardware Guide | Hardware Generation V+
Rohde & Schwarz DVS GmbH
Shutting Down the System
There are several possibilities to shut down the system. It
depends on whether the operating system is already loaded,
frozen or not completely loaded. Please act accordingly.
Shut down
with oper-
ating system
fully loaded
If the operating system is up and running, there are two ways to
shut down your system.
Perform the following steps:
1.
Turn the system off by shutting down the operating system
the usual way.
The operating system will then save your personal settings
and once it has ended, the system will turn off.
2.
Alternatively, you can initiate a fast shut down by pressing the
power switch briefly.
Some settings will be saved and afterwards the system
turns off.
System is shut down.
System Damage
It takes a while to safely erase all memory banks of
the system.
After a shut-down wait at least ten seconds
before starting the system again.
Data Loss
The fast shut-down may not save all your system
data and personal settings before the system turns
off.