Introduction
Conventions Used in this Guide
13
CLIPSTER | Hardware Guide | Hardware Generation V+
Rohde & Schwarz DVS GmbH
Screenshots
The screenshots shown in this documentation may be taken on
various operating systems as well as from pre-release versions of
the software. Their appearance may differ from your environ-
ment. However, they should contain all relevant elements that
you need to understand the described actions.
Command Descriptions
Command descriptions may additionally use the following nota-
tion:
Examples:
[Ctrl + F1]
If this is given, hold down the [Ctrl] key
and press simultaneously the [F1] key.
[Alt, F1]
If this is given, press the [Alt] key first and
then the key [F1] successively.
Examples:
#...
Has to be numerical.
<...>
Variable; this term has to be replaced by
an appropriate value.
[...]
Optional part; you don’t have to specify it.
<xxx>=y
Default; if you don’t specify <xxx>, it will
be set to the default value y.
{...}
Selection; select one of the given alterna-
tives, which are separated by commas.