Ronde & Schwarz (1309.6830.02 Quick Start Manual Download Page 30

Page: 30 / 77

R&S ZVH

Putting into Operation

Managing Options

Quick Start Guide 1309.6900.12 - 06

1.5 Managing Options

For special measurement tasks, you can equip the R&S ZVH with various firmware
options.

1.5.1 Enabling Options

To enable options, you have to enter a key code. The key code is based on the unique
serial number of the R&S ZVH.

► Press the SETUP key.

► Press the "Installed Options" softkey.

► Select the "Install Option..." item.

► Press the ENTER key.

The R&S ZVH opens an input field to enter the option key.

► Enter the appropriate option key.

► Confirm the entry with the ENTER key.

If you have entered the correct code, the R&S ZVH shows

If you have entered an incorrect code, the R&S ZVH shows

► Enter the correct code again.

1.5.2 Checking Installed Options

In the "Setup" menu, the R&S ZVH shows all options that are currently installed.

► Press the SETUP key.

► Press the "Installed Options" softkey.

The R&S ZVH shows a list of all available options and the current status of the option:

● "Installed": the option is installed and working.
● "Installed Portable": the option is installed and working, the license is a portable

one.

● "Removed: <option key>": indicates that a portable license has been removed from

the R&S ZVH and is ready to be transferred to another R&S ZVH.

Summary of Contents for (1309.6830.02














































































Search results

Summary of Contents for (1309.6830.02

Reviews:

Related manuals for (1309.6830.02

Brands by name

Popular brands

Ronde & Schwarz (1309.6830.02, Quick Start Manual

Search results

Summary of Contents for (1309.6830.02

Reviews:

Related manuals for (1309.6830.02

Brands by name

Popular brands