Romus 94570, Operating & Service Manual

Page: 13 / 28

Troubleshooting Guide
13
Problem Cause Solution
No power Insufficient power Inspect electrical cord for damage.
Switch/Circuit Check if circuit breaker and/or switch are
tripped.
Motor noise Fan guard is malfunctioning. ensure fan guard is not bent.
Machine is hard to handle. Machine is too heavy. Remove counterweight.
Blade is too large. Change to a smaller blade size.
Blade is too dull. Sharpen blade.
Blown fuses or circuit breakers Wrong extension cord Use appropriate extension cord (see Safety).
Poor quality outlet Move to a different outlet or better circuit.
Rattling Loose fasteners Check for loose nuts and bolts and re-tighten.
Worn out isolators Replace isolators.
Difficulty inserting shank Shank holder is too tight. Remove paint from shaft of the shank with
sandpaper, emery cloth, or a solvent.
401862-ROM_550-ROM_RevB