Do not connect it to a dimming pack.
Keep the air vents free at all times. Never cover the projector, even partially.
Do not switch on the projector immediately after it has been exposed to changes in
temperature. Leave the projector switched off till it has reached room temperature.
Ensure the projector has adequate ventilation. Ensure no ventilation slots are blocked.
Overhead Mounting
Install the Water Effects Projector in a suitable place, bearing in mind the following:
The construction of the ceiling the projector will be attached to should be able to
comfortably support 10 times the weight of the projector.
The projector must also be secured with a secondary attachment e.g. a safety cable or
chain.
Use appropriate fixtures (not included).
Adjust the desired inclination angle via the mounting bracket and tighten the bracket
adjustment knobs. Loosen the knob, adjust to the desired angle and tighten knob by
turning clockwise. Do not use a tool to turn, as this may cause damage.
01 = Hanging Bracket
02 = Focus lens
