7.
Best Use
In a darkened environment, with the effect projected onto a flat and white or pale-coloured
surface.
8.
Compatible ROMPA® Products
This product could be used with other Snoezelen® multi-sensory products from ROMPA®
that have a water theme such as:
19777 – 19780 Aquatic Bubble Tubes
CD641 etc. – Swimming With Dolphins CD etc.
21491 – LED Ceiling Panels
21828 – Fish Wall Stickers
21827 – Under The Sea Peel & Stick Border
9.
Starting Up
Because of the nature of this Projector, it is not advisable to take any short-cuts when
installing or using this product. Please read the entire manual. Familiarise yourself with the
product before using it. Only this product as described in these instructions.
10.
Detailed Description
Projects a circle of colour with a rippling water effect. Various colours and can be stopped
on one colour. Contains LEDs for minimal heat and maintenance. With built-in effects for
stand-alone mode. This product is not part of ROMPA®’s Wi Fi range as it has an internal
colour wheel rather than multi-colour LED lamps.
The internal colour wheel can be stopped at any point for both single and mixed colours.
The projector can be set to a static mode (operates the same one single colour) or colour
change mode (continually changes colour in sequence). To set the colour wheel into colour
changing mode (continually rotating), move the switch on the right hand side of the back
panel (indicated below as 03) to the ON position. To stop the rotation move the switch to
the OFF position. The internal colour wheel has four colours – red, green, blue and clear.
The colour wheel speed is pre-set and cannot be altered.
To adjust the focus rotate the lens assembly on the front of the product clockwise or anti-
clockwise to achieve a hard or soft focus.
