25
d.) Electronic fine adjustment of portion size
(example: 4 portions)
less
powder
standard
setting
more
powder
”4.5" is displayed as the standard value. With setting "4.0" less powder is ground, with
setting "4.9" more powder is ground.
By
briefly touching
the "-" or "+" sensor key, the setting of
powder quantity can be reduced or increased
in fine steps
.
NOTE:
In the operating mode "powder for coffee preparation", no fine adjustment of
the powder quantity can be made for the portion sizes "10", "11" and "12".
e.) Changing portion size and operating mode
• After reaching the maximum or minimum portion size, the operating mode is changed
automatically.
The change of operating mode is confirmed with a 2-fold signal tone.
• In the operating mode "powder for espresso preparation" ("1.0" to "2.9"), the setting
"2.9" is followed by the minimum setting "1.0" of the operating mode "powder for coffee
preparation" - and vice versa.
• In the operating mode "powder for coffee preparation" ("1.0" to "12"), the setting "12"
is followed by the minimum setting "1.0" of the operating mode "powder for espresso
preparation" - and vice versa.
NOTE:
The appliance saves the powder quantity setting selected the last. If you regularly
grind with consistent coffee beans and the same amount of powder, you usually do not
need to change this setting.
6.) Start/stop the grinding process
• By briefly touching the
ON/START/STOP
sensor key, you start the grinding process.
• The selected setting is shown in the display field.
• The backlighting of the
ON/START/STOP
sensor key is active.
• After processing the set portion size, the appliance stops automatically and switches to
operation mode.
The display field shows the last setting selected.
The backlighting of all sensor keys is active.
NOTE:
If no further operation of a sensor button is carried out within 2 minutes, the
appliance automatically switches to standby mode. By tapping the
ON/START/STOP
sensor button, the appliance can be switched back to operation mode.