20
Features
Touch control sensors
• The appliance is equipped with touch control sensors. The sensor keys can be operated easily
and very conveniently. Tapping the sensor keys activates the respective function.
Antistatic function
• The appliance is equipped with an antistatic function. The air in the powder outlet channel is
ionized by an ion generator, which significantly reduces the static charge. This function serves
to ensure that no powder sticks to the container, outlet channel or measuring spoon.
Cone grinder with overload protection
• The machine is equipped with a high-quality conical burr grinder. This allows whole beans to
be ground in a particularly aroma-friendly manner.
• To protect against damage caused by foreign bodies (e.g. small stones) in the coffee beans,
the grinder is equipped with an electronic overload protection. If the grinder blois blocked, the
grinding process is automatically stopped and the error message "E2" appears in the display.
Remove the grinding plunger (see page 21) and remove the blockage in the grinding mecha-
nism, then you can use the appliance again.
Standbymodus
• The appliance is equipped with an energy-saving standby function which is activated after
connecting the appliance to the mains. 2 minutes after the last operation (grinding, pressing a
key), the unit automatically switches back to standby mode.
• By pressing the
ON/START/STOP
key, the appliance changes back to the operation mode.
Seal on the powder outlet channel
• The appliance is equipped with a separate sealing on the powder outlet channel which
provides a seal between the powder outlet channel and the powder container. Thus, no powder
is lost during grinding.
Assembling and disassembling of the appliance
1.) Mounting/dismounting the beans container
• Place the beans container on the base unit
• When mounting the beans container, pay attention that the symbol “lock“ on the base unit
complies with the marking on beans container.
• Turn the beans container clockwise until the arrow marking for setting of grinding degree
complies with the desired grinding degree on the corresponding scale.