29
Interior illumination of the oven
This product contains a light source of energy effi cency class G. The interior illumination of the
oven chamber is lighting during the whole operation. Once the operating time is over, the lamp
turns out automatically.
How to change the oven light
• ATTENTION: Always unplug the power cord before chan-
ging the lamp!
• ATTENTION: Before changing the lamp, always allow the
appliance to cool down!
• Carefully unscrew the lamp cover, pull the defective halogen lamp aside.
• Insert a new lamp (heat-resistant - 230 V ~ 18 W, G9, T 300 ° C) into the base and carefully
press it in.
CAUTION
: Do not touch halogen lamps with your bare hands. If possible, use cloth
gloves or a paper towel.
• Then insert the lamp cover into the thread and screw it in hand-tight.
NOTE:
Use only suitable original bulbs! Spare parts might be obtained from your dealer.
Disassemble and assemble the door
The oven door is designed in such a way that, under normal conditions of use, there is no impu-
rity between the glass plates of the double glazing. The oven door should only be disassembled
and cleaned if heavily soiled. Proceed as follows:
Disassembling of the oven door
• ATTENTION: Always unplug the power cord before assemb-
ling the oven door! Do not reconnect the appliance to the
power supply until the oven door has been reassembled!
• ATTENTION: Before disassembling the oven door, always
allow the appliance to cool down!
• ATTENTION: Only operate the appliance with completely
assembled door!
• Open the oven door completely.
• Loosen the window brackets on the upper corners of the oven door with your thumb.
• Pull the window brackets off to the side.
• Carefully loosen the inner glass plate by slightly moving it back and forth.
• Pull the glass plate off towards the front.
• Clean both glass plates from the inside and outside.
• The oven door is assembled in reverse order. The
K
printed on the inner glass plate must be
inserted in the lower left corner of the oven door.
