Manufacturer of high quality equipment for powder coating
______________________________________________________
5
General
information
General
danger
The manual coating equipment is built to the latest specification and
conforms to the recognized technical safety regulations and it is de-
signed for the normal application of powder coating.
Any other use is considered as non-conform. The manufacturer is not re-
sponsible for any damage resulting from this - the risk for this is assumed
by the user alone! If the manual coating equipment is to be used for
other purposes or other substances outside of our guidelines, then
ROMER should be consulted.
Observance of the operating, service and maintenance instructions
specified by the manufacturer is also part of conformity of use.
The relevant accident prevention regulations, as well as other generally
recognized safety regulations, occupational health and structural regula-
tions are to be observed.
Furthermore, the country-specific safety regulations also must be
ob-served.
Further safety and operation notices will be found on the
accompanying CD or on the homepage
http://romerpp.pl
The start-up is forbidden until it has been established that the manual co-
ating equipment has been set up and wired according to the EU guide-
lines for machinery.
Unauthorized modifications to the manual coating equipment exempts
the manufacturer from any liability from resulting damages or accidents.
The operator must ensure that all users do have the appropriate training
for powder spraying equipment and are aware of the possible sources of
danger.
Any operating method, which will negatively influence the technical safety
of the powder spraying equipment, is to be avoided.
For your own safety, only use accessories and attachments listed in
the operating instructions. The use of other parts can lead to risk of
injury. Only original ROMER spare parts should be used!
Repairs must only be carried out by specialists or by authorized ROMER
service centers. Unauthorized conversions and modifications can lead to
injuries and damage to the equipment, and the ROMER guarantee
would no longer be valid.
These general safety regulations must be read
and understood mandatory be-fore start-up!