Manufacturer of high quality equipment for powder coating
______________________________________________________
24
Remote control by PROTON II manual gun
Various functions can be remotely controlled with the
+
and
-
keys on
the back side of the powder gun (PROTON II gun type):
-
Adjust the powder output by pressing the
+
or
-
key on the
gun. The powder output will be increased or decreased ac-
cordingly
-
Change application modes (Preset mode/Program mode) by
pressing the
+
and
-
keys on the gun at the same time. The
change takes place counterclockwise. Check by observing
the key LEDs on the control unit
Note:
By pressing one of the keys, the preset values display will be
shown!
Shut-down
The shut-down of the PROTON II Manual gun control unit takes place in
following steps:
1. Remove the powder gun trigger
2. Switch off the control unit
3. Switch off the Airmover (PROTON )
Note:
The adjustments for high voltage, powder output, electrode
rinsing air and fluidizing remain stored!
If in disuse during several days
1. Remove the mains plug
2. Clean the coating equipment (see the corresponding operat-
ing manual)
3. Turn off the compressed air main supply
Saving programs
Note:
The values in programs 1-20 and the 3 preset application modes are
saved automatically, without confirmation!