RoMedic Vega505EE, Instructions For Use Manual

Page: 8 / 177

Warnings
• The caregiver must be able to read and understand the Manual/IFU of the product.
• It is important to use only approved accessories to prevent unintended detachment of components and
subsequently a fall that may lead to patient injury.
• Use careful and gentle maneuvers when moving the lift to avoid swinging and impact injuries from surrounding
furniture and other objects.
• For optimal function and safety, the lift should be inspected regularly, see the Maintenance/Service manual.
• Lifting accessories must be properly fitted and tested in relation to the user’s needs and functional ability.
• Special care must be taken when using strong power sources such as diathermy and the like so that diathermy
cables are not placed on or near the device. In case of doubt consult with a Direct Healthcare Group representative.
• Never attempt to lift the mobile lift unit by the handlebar or lift arm.
• Never stand on the lift during when it is operating.
• Do not leave a user or patient unattended during a transfer.
• Never move the lift by pulling on the actuator.
• During a lift, the user must be over the base of support of the lift during the entire lifting procedure, to avoid tipping
of the lift. Never move the user, or start a lift from, outside the base of support of the device.
Safe working load
Different products on the same lift system (lift unit, slingbar, sling and other lifting accessories) may have different
allowable safe working loads. The lowest allowable safe working load always determines the safe working load of the
assembled system. Always check the safe working loads for the lift and accessories before use.
Contact your dealer if you have any questions.
Residual risks and risk control measures:
Risk Hazard Risk Control Measure Information
User Risk Device tilts. If a lift is started with the user far outside the base of
support of the lift, or if a user sitting in a sling is moved
outside the base of support of the lift, it could lead to the
device tipping, and the user falling.
During a lift, the user must be over the base of support of
the lift during the entire lifting procedure. Never move the
user, or start a lift from, outside the base of support of the
device.
Material Risk Components loosening or
breaking due to Corrosion. Improper treatment of the lift could lead to components
corroding. Use the lift indoors, and do not store or use it in
wet or humid environments.
See sections Contraindications, Precautions and Warnings
and Maintenance for more information and detailed
information about use and storage environments.
8 I F U
System