Assembling MiniLift200
Check to ensure that all components are included:
Lift motor, control box and battery pack.
Base with motor.Foot rest Handset and cord.
Instructions, charging cable and power supply cord for charging.
Assembly:
Place the upper section (1) above the lower section (2) and carefully lower it onto the
lower section. Push all the way down. Insert the bolts (3) in all four tubes and tighten.
Finally, place the cap nuts (4) on the bolts.
Assemble the footplate by attaching it to the crossbar and swinging it down. Make sure
the pins (6) insert into the holes of the plate.
Attach the leg spreading cable to the control box.
5
A
DETAIL A
1
2
3
4
