Important information
• MiniLift200 must be assembled in accordance with the assembly instructions provided
by RoMedic.
• Warranty does not apply if repairs or alterations are made to the lift by personnel who
are not authorized by RoMedic.
• Batteries control box and actuator on MiniLift must not come in direct contact with
water.
• To ensure optimal function, the lift must be inspected regularly. See section on other
maintenance details.
• Only use MiniLift200 on flat surfaces.
• Never move the lift by pulling on the actuator!
• Under no circumstances may max. load be exceeded. See section on technical infor-
mation and the product decal on the lift.
• Lifting accessories must be properly trial fitted and tested in relation to the patient’s
needs and functional ability.
• MiniLift200 may not be charged in wet areas or used during a shower and bath.
• Lift shall not be exposed to running water.
Do not push
Maximum load:
It may be different maximum allowable loads to different products on the assembled lift
system: lift, slingbar, sling, scale, and others accesories.
It is always the lowest maximum allowable load indicated for the respective products on
the system that applies.
Always check the markings on all products in the unit and contact RoMedic representativ
if you have any questions.
3
