background image

1 FOREWORD 

WARNINGS 

 

This unit is used for temperature measurement and not for disease diagnosis; it cannot be
used for emergency and continuous measurement in surgery. The patients cannot diagnose
the disease and get treatment by themselves on the basis of the measurement results, they
must follow the instruction of doctors. Please ask medical professionals to explain the
measured value of the body temperature.

 

The main material of the enclosure is plastic. Be careful to the potential allergic reactions to
these materials.

 

Please do not use with infectious wound.

 

Please do not touch or blow on the infrared sensor.

 

No mobile phones are allowed to be used around this product. Please do not use equipment
that generates electromagnetic fields near the product.

 

The use of heat and cold producing devices (such as electric heating blankets, heating pads
or ice packs) may impair the performance of the device and increase the risk of injury to the
patient.

 

Do not store the unit under sunlight, at a high temperature, in high humidity or dust.
Performance may be degraded.

 

Please do not disassemble or repair this device by yourself including modifying the device.

 

Please do not clean or perform maintenance on the device while in use.

 

Please wait for 30 minutes before use if the environment has a sudden change (e.g. from
under sunlight to an air-conditioned room), or the accuracy may be influenced.

 

Degraded sensors and electrodes, or loosened electrodes, can degrade performance or
cause other problems.

 

DO NOT open the battery cover around any source of ignition which has the potential to ignite
the batteries and cause a fire.

 

Please keep the device out of reach of infants, children or pets, inhalation or swallowing of
small parts is dangerous or even fatal.

PRECAUTIONS 

 

This product is intended to be used by lay users. It is not intended to be used by children
under 12 years. The user can take measurements and change the battery under normal
circumstances and can maintain the device and its accessories according to the user manual.

 

Please do not bend, or stretch, hit, drop this device or expose this device to heavy shock.

 

Performance of the device may be degraded if: operated or stored outside stated temperature
and humidity ranges or if the patient's temperature is below the room temperature. If the
thermometer has been stored at below freezing temperatures, please warm it naturally to
room temperature before use.

 

Clean the thermosensor (probe) before storage.

1

www.biomark.lv

Summary of Contents for THERM-IR















Reviews: