5 CLEANING AND DISINFECTION
●
For the thermosensor (probe): if there is dust or other dirt in the mirror or tunnel of the sensor,
clean the probe with a cotton swab dipped in anhydrous alcohol. Don't place the product
directly under the faucet to wash.
●
For the product itself: please wipe the product with a soft and dry cloth to avoid scratching of
the product. Do not clean the product directly with water.
●
Because infrared temperature adopts a highly sensitive technique to detect the temperature of
the target object, any dust layer not only may affect the measurement accuracy, but also may
cause a bacterial infection.
6 MAINTENANCE
●
Before every use, check the device. Do not use the device if it is damaged in any way. The
continuous use of a damaged unit may cause injury, improper results, or serious danger.
●
Store and use the device at a cool, dry and ventilated environment. Avoid approaching fire
and heat sources, or it will cause the battery to explode.
●
If you have any problems with this device, such as setting up, maintaining or using, or in the
case of an unexpected operation or event, please contact Van Oostveen Medical B.V ( don’t
open or repair the device by yourself).
7. TROUBLESHOOTING
Problem
Possible causes
Try this Solution
If the steady battery icon is the
only symbol shown on the display,
the device cannot work. The
battery should be replaced
immediately.
Replace batteries
No display. Thermometer does not
have power.
Please check if the batteries have been
loaded correctly or are out of power.
Also check polarity (<+> and <–>) of
batteries. Contact customer service if
thermometer still does not function.
8
www.biomark.lv
