35
6.
PrograMMing tHE
oH ESPrESSo
®
The two contents of the selector buttons [6] have been pre-programmed in the factory. The standard
contents are 4 cl for a small espresso cup and 6 cl for a big espresso cup.
The contents for both selector buttons [6] can also be adapted to your personal needs. Proceed as follows
to do so:
>
Switch on the machine with the on/off button [5]. The green indicator light [7] comes on.
>
Leave the operating dial [4] in neutral position.
>
Hold down both selector buttons [6] for about 5 seconds until the green indicator light [7] starts to flash.
>
Insert an espresso pod in the slot and switch on the machine by turning the operating dial to the back [4].
>
Put an espresso cup (big or small) under the spout [9].
>
Press one of the selector buttons [6] to determine the content of the small or big cup.
>
Press the chosen selector button [6] again when the desired content for the cup has been reached.
>
Turn the operating dial [4] back to neutral.
>
Repeat the same process to set the content of the second selector button [6].