Step 3 - Panel Wall Bracket Positions
⑤
②
Outside
View
Inside
View
Gasket
⑤
Wall
Profile
Wall
Profile
②
1.
Place the panel assembly into the panel bottom strip and dam to profile joint, then carefully place into the
wall profile.
2.
Dismantle the wall brackets and fit onto the panel glass, ensuring that all gaskets are fitted. Ensure that
the brackets are fitted the correct way (screws to the inside).
3. Mark the wall through the holes in the brackets using a pencil. Carefully remove the panel assembly
4. Drill the wall with a 6mm masonry drill (not supplied). Fit the wall plugs and remove any debris.
5.
Fit the inside bracket of the wall bracket to the wall and over the wall profile.
Note: We recommend 2 people carry out the procedures below.
Mark Through
Holes
③
