9
Front Lights (4)
This button operates the LED headlight.
On / Off Key (5)
The key switch is located on the right side of the tiller. Simply insert the key and turn clockwise to
switch the power on. The display will light up to indicate the power is on. There may be a slight delay
before the thumb levers operate as the controller checks the scooters circuits.
Note:
Never leave the key in the switch unattended to prevent unauthorised use. Do not switch
the power off to stop the scooter unless it is an emergency. The scooter will stop very
abruptly if stopped in this way.
The brake release lever is situated at the right rear of the scooter. This lever allows you to disengage
the drive mechanism and push the scooter in ‘freewheel’ mode. To disengage the drive push the lever
forward until you reach the stop position (indicated by the ‘N’ direction.)
Simply push the lever toward the back of the scooter to re-engage the drive mechanism (‘D’ position.)
The scooter will not operate when the lever is in the disengaged position. The scooter must be turned
off and on by the key switch to reset the circuits before it will resume normal operation. The scooter
will beep continually if the brake is disengaged when it is switched on.
Brake Release / Free Wheel Operation
Summary of Contents for Tulsa S245
Page 19: ...19 Notes ...