background image

Roma WiFi Colour Touch Screen Thermostat

• The colour touch screen thermostat is designed for electric 
floor heating or water heating systems. Equipped with the latest 
4.3 inch colour touch LCD display, the thermostat can be easily 
operated and understood. The thermostat is fully programmable 
to automate your heating, can be used in a simple manual 
mode or controlled remotely on a phone or tablet using the Smart 
Life APP.

• With five modes, these instructions will explain how to set your 
system to work in accordance with your lifestyle. This is done by 
pre-setting your preferred temperatures into the 7 days easy 
programmable function.

• Simple regulation with advanced programming sends commands
to the heating system according to a pre-selected temperature
variation. The thermostat control algorithm also includes an
anticipation function which reduces the discrepancy between the 
thermostat reading and the temperature at the centre of the room.
This helps save energy and make for a more even and comfortable 
room temperature.

• Choose from multiple sensor settings: Air temperature, Floor 
temperature and ambient (a combination of both air and floor 
sensors working together). Air temp is controlled through the built-in air 
temperature sensor and floor is controlled via the included external 
floor probe.              

Summary of Contents for CT1000

















Reviews: