Rolls-Royce Helicon X3, User Manual

Page: 127 / 140

Tools
11
Page 3 of 4 Doc. No.: 13S000411
Revision: A Copyright © 2010 Rolls-Royce plc
1 General
This chapter lists required and recommended tools for installation and maintenance
purposes.
Note: Tools required for maintaining subsuppliers equipment are not listed in
this chapter. Please refer to chapter 14 Subsuppliers Manuals for details.
For maintenance and/or replacement of the sensors and position reference systems, the
separate manual from each manufacturer must be used.
Note: For maintenance on electronic equipment, the use of electrostatic
discharge protection such as a wrist-band connected to a grounding point
is mandatory. A grounded surface is also recommended for such tasks.
2 Tools
2.1 Recommended Tools
The following tools are recommended for the installation and maintenance of this
system:
• Standard network technician tools
• Standard electrician tools
• Optic fibre termination tools (if applicable).
Caution: Always use appropriate tools for all maintenance tasks. Use of
inappropriate tools can lead to system malfunction.
2.2 Special Tools
No special tools are required for the installation and maintenance of this system.