17
RolliBot RolliCool 310 Portable AC with Heater User Manual
6.2 – How to Drain the Unit
In most cases, the AC unit will not require draining. In the event that draining is necessary, the
unit will sound an alarm and the display’s “Full“ light will turn on to indicate the water reservoir
inside is full.
• Please make sure your AC unit is completely powered off before
performing any type of maintenance.
• If relocating the unit before draining, move it carefully so as not
to spill the water inside the reservoir.
• Make sure the drainage pipe has adequate space underneath
for draining. If using the lower drainage opening, ensure there
is a suitable area for water runoff . If using the upper drainage
opening, fetch a container for water runoff before connecting the
pipe.
• Keep the drainage cover and the water plug on at all times when
not draining the unit.
• When draining the unit, do not allow the power cord to come in
contact with water.
• During drainage, the unit may be tilted slight backwards to
promote faster drainage.
• Keep in mind the unit may hold more water than expected. If using a container, do not use a small one or either take care of
drainage
outdoors.
Using the Upper & Lower Drainage Openings
Remove the pre-installed caps and covers as needed. The covers will be used for draining.
Drainage Parts
Plug
Pre-installed. This
piece keeps any water
from draining out
unexpectedly.
Cover
Pre-installed. Screws
over the opening to
secure the plug or
connector.
Drainage Pipe
Fits over the connector
and allows water to
drain out and from
the unit.
Connector
Used to connect the
drainage Pipe to the
AC unit.
Spacer
This piece attaches to
the connector and fi ts
between it and the
opening.
