15
RolliBot RolliCool 310 Portable AC with Heater User Manual
5.3 – Cool Mode
With this mode, the unit will turn on and regulate temperature as selected.
1. Press the power button on the control panel or remote.
2. Press the mode button on the control panel or remote multiple times until the display’s “Cool”
light turns on.
3. Use the up and down buttons (left/right on the remote) to set the desired temperature
61~88°F (16~31°C).
4. Use the fan button to cycle through fan speeds.
When cool mode is active, the unit will not turn on if the chosen temperature is higher than the indoor temperature.
5.4 – Dehumidify Mode
With this mode, the unit will turn on and begin removing moisture from the air.
1. Press the power button on the control panel or remote.
2. Press the mode button on the control panel or on remote multiple times until the display’s
“Dry” light turns on.
In dehumidify mode, the fan speed is automatically set to low and cannot be adjusted.
5.5 – Heat Mode
With this mode, the unit will turn on and begin outputting the hot air.
1. Press the power button on the control panel or remote.
2. Press the mode button on the control panel or on the remote multiple times until the display’s
“Heat” light turns on.
3. Use the up and down buttons (left/right on the remote) to set the desired temperature
61~88°F (16~31°C).
4. Use the fan button to cycle through speeds.
5.6 – Sleep Mode
With this mode, the unit will turn on and begin operating at a low speed. This mode is similar to
fan mode at low fan speed and functions as a way to aid sleep especially if you are used to light
noise around bedtime.
1. Press the power button on the control panel or remote.
2. Press the fan and up buttons together on the control panel or the sleep mode button on the
remote. The display’s “Sleep” light should turn on. Press again to turn this mode off .
In sleep mode, the fan speed is automatically set to low and cannot be adjusted.
