Rollei VD-10, Manual, Page: 39 / 44

39
Transferring Recordings to a Computer
To transfer data from the microSD memory card, you can remove
the card and transfer it via a card reader or connect the digitizer
to your computer via USB. The on/off switch (7) should be set to
„Off“. A „USB Mode“ menu will appear on the digitizer‘s monitor
(8). Select „Data Transfer“ and confirm the selection with the OK
button (13). The digitizer is recognised as a removable disk and
installed. Manage your data as if you were copying or moving data
from a hard disk. Use only the supplied USB cable to connect the
digitizer to your computer.