Rollei VD-10, Manual, Page: 31 / 44

31
Commissioning
Getting Started
Connecting the input source
To do this, use the existing outputs of the input source. If you have
a current game console, connect the console to the HDMI video
input (HDMI IN) of the digitizer using an HDMI cable (not included).
With older devices, use the corresponding output signal via Scart or
AV cable.
For Scart outputs, you need the Scart adapter supplied and the 3.5
mm cinch cable, which is then connected to the AV composite In (3)
input of the digitizer.
After the input source has been connected, when the digitizer is
switched on, the picture of the input source is displayed on the
monitor (8) of the digitizer and the sound is output via the internal
loudspeaker (19).
Connecting the digitizer to a monitor/TV
If you want to view and control the digitizer‘s recordings on a TV
set or monitor instead of on the internal monitor(8), connect an
HDMI cable (not included) to the digitizer‘s HDMI video output (4).
and the TV set or monitor. Select the corresponding input on the