Rollei Bullet 3S Manual Download

Page: 8 / 18

Notes:
a.Under the voice recording mode

，

Press “Record” key once, the system starts recording, voice

recording duration is displayed on the bottom of TFT display screen and the green indicator twinkles
slowly; if press “Record ” key again, the system will stop and save the current audio file recorded, the
green indicator is off and the red indicator remains bright (the corresponding operating prompt is on
LCD segment screen), and it returns to the preview mode.

b.The voice recording process only responds to operations of “Record”, “Shutdown” and “VOX Switch”

key; if turn on “VOX Switch” in voice recording, the voice recording will be stopped and the file will be
auto saved.

c.The laser icon will be displayed on the top left corner of the preview interface when turning on the

function of laser synchronous shooting, which indicates the system is in this shooting mode. At this
time, the laser will be turned on when starting recording and it will be turned off when stopping
recording.

(2)Setting of camera parameter:
a.Single shooting: The shooting mode is auto set in single shooting when starting up every time; To

press “Shutter” once can take one photo;

b.Three photos continuous shooting: To press “Shutter” once can take three photos continuously;
c.Continuous shooting: Take one photo every 2s/3s/5s/10s/20s/30s, till to press key to stop or the card

is full, or the power is run out;

d.Self-timer: Select the self-timer delay time (0s,5s or10s). Press “M” key to return to “Preview” state

after selecting; press “Shutter” once, the system will start the timer and the self-timer indicator
twinkles at the end of the delay time and it takes one photo. After finishing the self-timer for one time,
the system will auto recover the shooting mode to single shooting.If the 'Self-timer Delay Time” has

been set, but the machine is restarted without pressing “Shutter” key, the machine will auto set the

'Self-timer Delay Time' at the state of 0s;

e.Image resolution: Select 3M, 5M or 8M (interpolated);
(3)Setting of system parameter:
a.Key tone: Turn on or turn off the key tone;
Note: Voice of photo shooting and video recording cannot be turned off through this item. It only turns

off the key operation voice and there is no switch to turn off voice of photo shooting and video
recording in the machine system.

b.Self lamp: please turn it on or off before self timing; (the default setting is “ON”)
c.Time display: Please set before using; the machine will auto record the shooting date and time when

shooting image and display on the bottom right corner of the file;

d.Loop coverage: The video/audio file will be auto saved in segment once every 15 minutes when setting

“Loop Coverage”; and if it is not set, the video/audio file will be auto saved in segment once every 30
minutes.

Parameter Settings:

In preview mode, press “M” key to enter the menu interface, press “<” or “>” key to move the cursor left and

right, and press “+” or “-” key to move the cursor up and down. After selecting the menu, press “OK” key to set
the selected menu and to press “M” key again can exit.
(1)Setting of camera parameter:
a.Video image resolution: Select 720/30,WVGA/60,QVGA;
b.Bit Rate: the sampling rate in transforming image into digital signals at the time of video recording.
Options in recording modes :720P (8M/4M)

．

Note:Clear image requires high bit rate and large file size at the same time.
c.Laser synchronous shooting: Turn on or turn off the laser transmitter;
d.Shooting mode: Select video recording “ ” or voice recording “ ” ;

-6-