Rollei Bullet 3S Manual Download

Page: 10 / 18

Operations:

1.Insert the Micro SD Card.
Note: Please select class 6 Micro SD cards.
2.Turn the power switch to “ON” to turn on the camera. The red indicator will be lightened and the Rollei

Bullet 3S 720P will enter the preview mode.

Note:
a.In case of low battery power, you will find the battery icon “ ” and the message “Low Power” on the

TFT screen.

b.If no Micro SD card is inserted, you will find the Micro SD card icon “ ” on the TFT screen.
3.Video recording:
(1)Manual recording:

Press “Record” key once in preview state, the system will start recording, the video recording duration

will be displayed on the bottom right of TFT display screen, the “Green Indicator of Video/Voice
Recording” and the frontal “Video Recording/Shooting Indicator (Red)” will twinkle slowly, and the
recording duration on LCD segment screen is displayed normally. The video recording process only
responds to operations of zoom in (“+” key)/zoom out (“-” key) function; if press “Record” key again, the
system will stop and save the current video recording file, the frontal green indicator of video recording
will be off,the camera will return to the preview state, and the recording duration on LCD segment screen
will be stopped displaying.
Note:
a.Turn the power switch to “OFF” in video recording, the system will save the current file recorded and

then shut down;

b.If the battery power is low in video recording, the system will save the current file recorded and give

the message “Low Battery” on TFT display screen until the camera is turned off or auto enters standby
mode;

c.If the memory space gets full in video recording, the system will save the current file recorded, give the

message “Out of Memory” on TFT display screen, and go back to the preview mode. The video
recording duration on LCD segment screen also will be stopped displaying;

d.In cyclic recording mode, the system will auto save a file every 15 minutes .
e.After it is fully charged, it can continuously record time is about 2.5 hours . The continuous voice

recording time is about 3 hours;

f.In voice control mode, the system will start recording when the environmental voice is higher than 65dB

and the green indicator will twinkle slowly; if the environmental voice is lower than 65dB and it lasts for
2 minutes, the system will auto save the 2-minute file recorded, the green indicator will be off, the red
indicator will remain bright (the corresponding record stopping prompt will be displayed on LCD
segment screen), and it returns to the preview state;

g.To press “+” or “-” key in voice recording mode cannot execute voice increasing/reducing operation;

however,to press “+” or “-” key when recalling audio file can execute voice increasing/reducing
operation;

h.Connect the machine to high-definition display device with HDMI cable in preview state, the basic

operation of the machine can be finished on the high-definition display device; however, the digital
zoom function cannot be realized in 720P mode;

4.Photo shooting

You can set the image resolution before shooting photos. Press “M” key to enter the setup interface,

press “>”or “<” key to move the cursor to “ ”,select the menu “ Resolution”, and press “OK” key to
enter the resolution setup menu. There are three resolution modes available for your selection:

-8-