Automate
™
Programming Instructions | MT03-0302-067001 |
15
ROLLEASE ACMEDA
Step 1.
IMPORTANT!
IMPORTANT!
Locate the optimal position for solar panel in window.
Ensure all components are available for installation scenario.
Top Fix
Side Fix
Ensure solar panel has adequate exposure to sunlight.
When selecting a position for solar panel, consider any external obstructions like trees, building, signs, etc. that
may limit the amount of sun light reaching onto the solar panel.
IMPORTANT!
Fully charge the Motor or Battery Pack before beginning Solar Panel installation.
The PV panel supports two motor voltages; however a single PV panel can only charge one motor-type at a time.
That is, if the 12V port is connected to a 12V motor, the USB (5V) port is switched off. Conversely If the 12V port is
NOT connected, the USB port is automatically switched on.
Step 2.
OPTION A.
Installing Solar panel
i.
Break off excess bracket length using Pliers (if required).
ii.
Install mounting bracket to wall/mounting point.
ii.
Fix Solar panel to mounting bracket using screw.
iii. Apply stickers onto the Solar Panel to seal unused mounting holes.
Attaching Mounting Bracket to Window Frame
Possible Orientations
Stickers
Screw
6.2 Installation Process
