manualshive.com logo in svg

rollease acmeda AUTOMATE Solar Panel 2.0, Manual, Page: 16 / 20

Share
Download
rollease acmeda AUTOMATE Solar Panel 2.0 Manual Download Page 16

16 

| Automate

™

 Programming Instructions | MT03-0302-067001 

ROLLEASE ACMEDA

Clean the window or surface with alcohol wipe.

Allow surface to dry.

Peel protective film off Dual Locks.

Press firmly onto fixing surface.

Apply hand pressure for 5 seconds and check if firmly attached.

iv.

Dual Lock

Protective Film

Stickers

IMPORTANT!

Any partial or total covering of any solar panel cell will degrade solar panel performance.

OPTION B.

Clean Solar panel front surface with alcohol wipe.

Allow surface to dry.

Peel protective film off one side of Dual Lock and attach to one end of Solar panel.

Press adhesive tape firmly onto Solar panel surface for 5 seconds to ensure good adhesion.

Ensure that Dual Lock does NOT cover any portion of the Solar panel cells.

Repeat previous steps for attaching adhesive tape to other end of Solar panel.

Apply stickers onto the Solar Panel to seal unused mounting holes.

i.

ii.

iii.

Attaching Solar Panel via Dual Lock to a Window or surface

Summary of Contents for AUTOMATE Solar Panel 2.0





















Reviews:

No comments