Automate
™
Programming Instructions | MT03-0302-067001 |
17
ROLLEASE ACMEDA
6.3 Bending Bracket
48mm
22mm
36mm
IMPORTANT!
Bend the bracket prior to installation of the solar panel
The bracket should be bent at a distance of 22mm, 36mm or 48mm from the base of the bracket as shown below:
IMPORTANT!
Ensure the bend angle is between 150° to 180°
Bracket can be bent in order to receive more direct sunlight which provides more energy to the motor.
Make sure that the solar panel has adequate exposure to sunlight
150° - 180°
