Commissioning
EVQROCM-01-V03-R0 Installation and Operation Manual
Quantum:EV OpenCharge
January 2022
Page
18
of
25
Commissioning
If the VendElectric service is
NOT
being used, another service provider will be required to
administer smart services and commissioning will need to be performed in accordance
with the alternative service provider’s instructions.
Commissioning with VendElectric
NOTE:
A Smartphone or similar web enabled device with a working internet connection
is required for the next steps.
1. All preliminary tasks listed in the
Host’s Guide
(shown at the end of this manual) must
have been performed by the customer (Host) before commissioning can proceed.
2. To complete commissioning, refer to the
Installer’s Guide
(shown at the end of this
manual).
3. Once commissioning is complete, the Host will receive an invitation from
VendElectric to set up their Back Office.
4. Engage with the customer to install the VendElectric application to their
smartphone or similar device from either the
App Store
for Apple devices or from
Google Play
for Android devices.
x
The application is also accessible on almost any device with a web browser.
https://app.vendelectric.com
LED Illumination
The pedestal incorporates an amenity LED illumination lamp which activates in response
to changing light levels.
1. Cover the light sensor, located on the side of the pedestal, the lamp should
illuminate.
2. Uncover the light sensor and the lamp should switch OFF.
NOTE:
To prevent flickering in frequently changing light conditions such as headlights or
shade from passing vehicles, the lamp has a built-in delay before it switches on / off.
After Installation
Make sure this manual is given to the Host.
Summary of Contents for OCPP0410
Page 27: ......