Operation
EVACOCM-01-V02-R3 Installation and Operation Manual
AutoCharge:EV OpenCharge
December 2021
Page
16
of
21
Operation
NOTE:
At the end of a charging session, always disconnect the cable from the vehicle
before disconnecting from the charger.
Operating instructions for this charger are shown on the unit fascia. For more detail, refer
to the
EV Driver App User Guide
included within the charger packaging.
VendElectric EV Driver Application
The VendElectric EV Driver Application is a free download for use with smartphones
running Google Android or Apple IOS. The application may be downloaded from Google
Play or the Apple App Store.
Alternatively, the application can be used via a web browser.
x
https://app.vendelectric.com
For operation of the system using the online application, please refer to the
EV Driver App
User Guide
included within the charger packaging.
Status Indicator Guide
Flashing blue light
Socket Available.
Flashing green light
Socket Available for ‘Plug and Go’ charging
(optional feature to be activated by the Host).
Fixed blue light
Cable plugged in but not charging.
Fixed green light
Charge in progress.
Fixed red light
Potential earth leak fault detected by the 6mA DC device.
Flashing red light
Potential Communications Fault.
No light
No power to the unit or the breaker within the unit has
tripped and needs to be reset.
1. Make sure the status indicator shows that the unit is ready to charge.
2. Connect the charging cable to the charger.
3. Connect the other end of the cable to the vehicle
4. Use the mobile application to start the charge session.
x
Alternatively use an RFID card/fob to start the charge session.
x
The charger will issue a ‘beep’ sound to indicate the card has been recognised
and accepted.
5. Make sure the status indicator changes to a fixed green light.
Commissioning
AutoCharge:EV OpenCharge
EVACOCM-01-V02-R3 Installation and Operation Manual
Page
15
of
21
December 2021
Commissioning
If the VendElectric service is
NOT
being used, another service provider will be required to
administer smart services and commissioning will need to be performed in accordance
with the alternative service provider’s instructions.
Commissioning with VendElectric
NOTE:
A Smartphone or similar web enabled device with a working internet connection
is required for the next steps.
1. All preliminary tasks listed in the
Host’s Guide
(shown at the end of this manual) must
have been performed by the customer (Host) before commissioning can proceed.
2. To complete commissioning, refer to the
Installer’s Guide
(shown at the end of this
manual).
3. Once commissioning is complete, the Host will receive an invitation from
VendElectric to set up their Back Office.
4. Engage with the customer to install the VendElectric application to their
smartphone or similar device from either the
App Store
for Apple devices or from
Google Play
for Android devices.
x
The application is also accessible on almost any device with a web browser.
https://app.vendelectric.com
After Installation
Make sure to pass this manual to the Host.
Summary of Contents for OCPP0010
Page 23: ......