7
➏
➐
➀
Attach the wiring covers B and C.
➀
Attach the wiring covers A to the front cover.
➁
Attach the cable retainer.
➂
Attach the rubber cap.
Wiring cover C
Wiring cover B
Screws
silver, M4 x 8 mm
Screws, with washer
M4 x 6 mm
The interlock wiring is along
in the frame.
Interlock switch
Wiring covers A
Screws
silver, M4 x 8 mm
Rubber cap
Cable retainer
Front cover
Note:
When installing the wiring covers B and C and
the switch box, be especially careful to keep the inter-
lock wiring from being pinched.
Note:
Using a cutter, make a cross-shaped cut in the
center of the rubber cap for the front cover as required.
This cut is used when you want to pass the sensor cable
or the like through.
