5
➀
Line up bottom stays A and B with the modeling
machine's rubber feet and perform positioning of the
safety cover.
Note:
After the safety cover has been installed, the mod-
eling machine cannot be relocated. Be sure to perform
emplacement of the modeling machine before attach-
ing the safety cover.
Assembly
➀
Place the modeling machine at the installation loca-
tion.
➁
Remove the switch box from the modeling machine (4
screws). Pull out the wiring from the switch box.
Note:
Place the removed switch box on the modeling
machine's table or base cover.
➀
Attach the left side frame.
➁
Attach the right side frame.
➂
Attach the top frame A.
➃
Attach the back frames A and B.
➊
➋
Switch box
Bottom stay A
Bottom stay B
➌
Screws:
silver, M4 x 8 mm
Top flame A
Back flame B
Back flame A
Right side frame
Left side frame
Top flame A
Back flame
Side frame
Side frame
