12
Rubber cap
Rubber cap
➀
Attach the rubber caps.
➁
Pass the power cord and other necessary cables through
the rubber caps and connect them to the modeling
machine.
➀
Attach the back panel A.
Screws
silver, M4 x 8 mm
Back panel A
Back panel A
Back flame A
➀
Make sure the hatch panel opens and closes
smoothly.
➁
Close the hatch panel and start the modeling
machine. Make sure that cutting operation is
possible when the hatch panel is closed.
➂
Make sure that the interlock feature is actu-
ated and cutting operation is restricted when
the hatch panel is opened.
Note:
Use a cutter to make a cross-shaped cut in the
centers of the rubber caps to match the thickness of
the cables.
Note:
If the interlock feature is not actuated correctly,
repeat the adjustment in step 10.
DOC-0596 R1-060621
