Roland ZBX-500, User Manual

Page: 13 / 30

12
3 Connection
Do not use with any electrical power
supply that does not meet the
ratings displayed on the MDX-500 or
PNC-3200.
Use with any other power supply may lead
to fire or electrocution.
Ground the unit with the ground
wire.
Failure to do so may result in risk of
electrical shock in the even of a mechanical
problem
If you are using the safety cover,
detach the key connector from the
MDX-500 or PNC-3200.
Unintended operation may cause injury.
Do not connect the power cord with
other electrical loads on a single
electrical outlet.
Doing so may generate heat and cause fire.
NOTICE
Be sure that the power to both the computer and the main unit is switched off when connecting the cable.
Securely connect the power cord, computer I/O cable and so on so that they will not be unplugged and cause
failure during operation. Doing so may lead to faulty operation or breakdown.
The cable included with the PNC-3200 (for connecting the switch panel) should not be used to connect any
other devices. Doing so may damage the equipment.