Roland ZBX-500, User Manual

Page: 11 / 30

10
2 Setting Up
If you're using the MDX-500, then
unpacking, installing, and moving
are operations that must be carried
out by four or more persons.
Failure to do so may result in falling of the
unit, leading to injury. (The machine weighs
92 kg (202.8 lb.). )
If you're using the PNC-3200, then
unpacking, installing, and moving
are operations that must be carried
out by two or more persons.
Failure to do so may result in falling of the
unit, leading to injury. (The machine weighs
60 kg (132.3 lb.). )
Install on a stable surface.
Failure to do so
may result in
falling of the unit,
leading to injury.
Use within a temperature range of 5 to 40
°
C (41 to 104
°
F) and within a humidity range of 35 to 80%. NOTICE
Do not place any object except tools or workpiece materials inside the safety cover.
Doing so may not only obstruct operation, it may result in machine breakdown.
To prevent accidents, do not install in any of the following types of areas.
• Avoid use in areas subject to strong electric noise.
• Avoid use in areas subject to high humidity or dust.
• The MDX-500 or PNC-3200 generates heat when used, and should not be installed in an area with poor heat
radiation characteristics.
• Do not install in an area subject to strong vibration.
Do not place objects on the heads of the MDX-500 or PNC-3200 or on the safety cover.
When you are installing the MDX-500 or PNC-3200 and the safety cover on a table with casters, securely
engage the caster stoppers.