background image

 

Owner’s Manual

 

03233978          ’04-5-2TP

 

Owner’s Manual

 

 

 

To resize thickness, move all items on the front cover

and center registration marks to left or right

 

Thank you, and congratulations on your choice of the VK-88 combo organ.

 

Before using this unit, carefully read the sections entitled: “IMPORTANT 

SAFETY INSTRUCTIONS” (p. 2), “USING THE UNIT SAFELY” (p. 3, 4), and 

“IMPORTANT NOTES” (p. 5). These sections provide important information 

concerning the proper operation of the unit. Additionally, in order to feel 

assured that you have gained a good grasp of every feature provided by 

your new unit, owner’s manual should be read in its entirety. The manual 

should be saved and kept on hand as a convenient reference.

 

Conventions Used in This Manual

 

• Button names are enclosed in square brackets; e.g., [REVERB] button.

• Fractional harmonic bars (p. 31) are expressed like this: 1-1/3'; 2-2/3'.

• [1]–[8] means that you should press one of the buttons from [1] 

through [8].

• The dark/lit/blinking status of an indicator is distinguished as 

follows.

 

Copyright© 2003  ROLAND CORPORATION

All rights reserved. No part of this publication may be reproduced in any form 

without the written permission of ROLAND CORPORATION.

dark

blink

lit

Summary of Contents for VK-88





















































































































Reviews: