59
Using the Controllers
[REGISTRATION] button’s indicator is lit
If you want to stop editing, press the [H-BAR MANUAL] button.
3
Press the [WRITE] button to finalize the function assigned to the control
pedal.
The function assigned to the control pedal will be saved.
The indicators for the [1]–[8] buttons light up while the settings are being saved.
[8]
ORCHESTRAL TONES
EXPRESSION
Select this when you want to use the
expression pedal to control the volume of
the Orchestral Tones.
While this function is being used, the
expression pedal connected to the
EXPRESSION PEDAL jack will affect only
the volume of the organ.
Button
Parameter
Page
[1]
D BEAM SYNC
The same function that is assigned to the
D BEAM controller will also be assigned
to the control pedal. When you change the
function that is assigned to the D BEAM
controller, the function that is assigned to
the control pedal will also change.
[2]
CRESCENDO
As you depress the expression pedal
connected to the EXPRESSION PEDAL
jack, the volume of all harmonic bars will
gradually become louder.
When the expression pedal is fully
depressed, the harmonic bar volumes will
be at maximum, and the rotary will switch
to FAST. As you return the expression
pedal toward yourself, the volume will
decrease.
[3]
RING MODULATOR
When you depress the control pedal, the
ring modulator (p. 43) will be applied. The
depth to which you depress the control
pedal will control the depth of the ring
modulator.
[4]
TONE WHEEL BRAKE
The wheel brake will be applied (p. 43).
[5]
SPRING SHOCK
This lets you produce the sound of a
spring reverb unit being jarred (p. 43).
Button
Parameter
Page
NOTE
The control pedal has no effect
when the D BEAM [ON]
button is off while “D BEAM
SYNC” is assigned to the
control pedal.
NOTE
When the “SPRING SHOCK”
function is assigned to the
control pedal, please be aware
that raising the reverb level
excessively will produce a
high-volume impact sound. If
you want to reduce the volume
of the impact sound, use the
REVERB [LEVEL] knob to
adjust the reverb level (p. 45).
If you press the VIBRATO
AND CHORUS [UPPER]
button, the setting will return
to its initial value.
NOTE
Never turn off the power
while the setting are being
saved.
VK-88_e.book 59 ページ ２００４年４月２０日 火曜日 午前９時０分
