Roland V-Combo VR-09, Reference Manual

Page: 48 / 65

Detailed Settings for All Functions (Menu)
48
Category Parameter Value Explanation
EFX
Reverb Type
Selecting the Type of Reverb (Reverb Type)
Here you can select the type of reverb.
By changing the reverb type you can experience the sensation of performing in a variety of locations.
ROOM The reverberation of a room
STAGE The reverberation of a stage
HALL The reverberation of a hall
CATHEDRAL The reverberation of a cathedral
PLATE Bright and metallic reverberation
SPRING The reverberation of a spring reverb unit (a device that uses a spring to produce a reverb effect)
Wall Type
Changing the Wall Type (Wall Type)
By changing the reverb type you can experience the feeling of performing in various different locations, and by changing the
wall type (the material of the walls) you can make further adjustments to the way in which reverberation occurs.
* When the Reverb Type is “SPRING,” the wall type you’ve specified will be ignored.
DRAPERY Pleated curtains
CARPET Carpet
ACOUSTIC TILE Acoustic tile
WOOD Wood
BRICK Brick
PLASTER Plaster
CONCRETE BLOCK Concrete block
MARBLE Marble
Portamento
You can apply portamento (an effect that makes the pitch change smoothly between one note and the next) to piano sounds
and synthesizer sounds.
REFERENCE
For details, refer to “Making the Pitch Change Smoothly (Portamento)” (p. 26).
Keyboard
Initial Touch
Adjusting the Initial Touch Sensitivity (Initial Touch)
This adjusts the initial touch (the keyboard velocity sensitivity).
OFF
Initial Touch is off.
Volume remains constant regardless of how hard you play.
1–10
Initial Touch is on.
Striking the keys more forcefully will produce correspondingly louder sounds.
The change in volume when the keys are played forcefully increases as the value is increased.
PedalBass Mode
Specifying How the Pedal Part Will Be Sounded (PedalBass Mode)
You can specify whether the pedal part will sound only single notes at a time (MONOPHONIC) or will be able to play multiple
notes (POLYPHONIC).
MONOPHONIC, POLYPHONIC
Solo Mode
Changing How Part 2 Will Be Sounded (Solo Mode)
You can change how part 2 will produce sound when Dual is selected.
* This does not affect organ sounds.
OFF All keys you play will produce sound.
ON Only the highest key you play will produce sound.
Controller Damper Assign
Changing the Function of the Pedal Switch (Damper Assign)
You can select the function that’s assigned to the pedal switch connected to the DAMPER jack.
DAMPER Use as a damper pedal.
REGISTRATION SHIFT Switch consecutively through registrations.
LOOPER Control the looper function (p. 38).
ROTARY FAST/SLOW Switch the rotary speed between “FAST” and “SLOW.”
RHYTHM START/STOP Start/stop the rhythm pattern (p. 33).
SONG START/STOP
Same function as the [ ] (START/STOP) button.
For details about how to make menu
settings, see p. 45.