8
Panel Descriptions
When using the
VC-1
, the actual functions of the V-Synth XT’s buttons and knobs may not correspond to
the functions ascribed to these controls on the V-Synth XT’s panel. Here is a description of the names and
functions in each section of the V-Synth XT when it is used with the VC-1. Please read this material
together with “Panel Descriptions” in the V-Synth XT Owner’s Manual.
fig.02-01(FrontPanel1–9)
VOLUME knob
Adjusts the overall volume that is output MAIN OUT jacks and PHONES jack. (p. 11)
V-CARD button
Starts up “VC-1” (p. 11). Also used to switch among the software in the V-CARD series, “VC-1,” “VC-2,”
and “V-Synth.”
PREVIEW button
By pressing the PREVIEW button you can audition (preview) the current patch.
USB Connector
You can connect it to your personal computer to send or receive MIDI messages.
*
The USB Audio function and USB Storage function are not available when you’re using the VC-1. If you want to
back up VC-1 data to your computer, follow the procedure described in
“Connecting to Your Computer via
USB (USB Mode)”
of the
“V-Synth XT Owner’s Manual.”
PHONES Jack
This is the jack for connecting headphones (sold separately). (p. 11)
Front Panel
POWER
1
2
4
5
6
7
8
9
10
11
3
1
2
3
4
5
vc1_for_XT_e2 8 ページ ２００５年３月２３日 水曜日 午後４時１３分
