75
Menu List
8: AUDIO INPUT
HDMI IN 1–8, AUDIO INPUT
Menu item
Value
(Bold: default)
Explanation
INPUT LEVEL
-INF–
0.0
–10.0dB
Adjusts the input volume.
INPUT MUTE
OFF
, ON
Turns the mute function on/off. If this is “ON,” the input audio is temporarily silenced.
SOLO
OFF
, ON
Turns the solo function on/off. Only the audio for which this is “ON” is heard in the
headphones.
* The solo function applies to the headphone output. It does not affect output other
than the headphones.
EFFECT PRESET
Specifies an effect preset (high-pass filter, compressor, equalizer).
* When you change a preset, the settings of each effect are overwritten.
DEFAULT
For line input (default setting)
MEETING
For meetings
INTERVIEW
For interviews
AMBIENT MIC
For capturing ambient sound
WINDY FIELD
For capturing ambient sound in a windy area
DE-ESS & POPS SOFT
For reducing sibilants
DE-ESS & POPS HARD
For reducing plosives
DELAY
0.0
–500.0msec
(
0.0
–29.9/25.0frame)
Adjusts the delay time of the audio.
Effect This outputs audio with a delay.
HIGH PASS FILTER 75Hz
OFF
, ON
Turns the high-pass filter on/off.
Effect Cuts off unneeded low-band audio. The cutoff frequency is 75 Hz.
NOISE GATE
OFF
, ON
Turns the noise gate on/off.
Effect This mutes audio that is below a specified level.
THRESHOLD
-80.0–
-50.0
–0.0dB
Specifies the level used as the threshold for removing audio. Audio below the level set
here is removed.
RELEASE
30–
380
–5000ms
Adjusts the length of time until the audio is fully attenuated after audio falls below
the threshold.
COMPRESSOR
OFF
, ON
Turns the compressor on/off.
Effect This compresses audio that exceeds a specified level.
THRESHOLD
-80.0–
-50.0
–0.0dB
Specifies the level used as the threshold at which the compressor is applied.
Compression is applied to audio that exceeds the threshold.
RATIO
1.00: 1, 1.12: 1, 1.25: 1, 1.40: 1,
1.60: 1, 1.80: 1, 2.00: 1, 2.50: 1,
3.20: 1, 4.00: 1,
5.60
:
1
, 8.00: 1,
16.0: 1, INF: 1
Specifies the degree of compression applied to the audio. The state in which no
compression is applied is defined as “1.”
ATTACK
0.2–
1
–100ms
Specifies the time until compression starts when audio exceeding the threshold is input.
RELEASE
30–
380
–5000ms
Adjusts the length of time until compression ends after audio falls below the
threshold.
AUTO GAIN
OFF,
ON
Turns the auto makeup gain feature on/off.
If this is “ON,” the final output volume level after applying the compressor is
automatically adjusted according to the “THRESHOLD” and “RATIO” settings.
The total of the “MAKEUP GAIN” setting value described below and the value
calculated by auto makeup gain becomes the final output volume level
(up to +34 dB).
MAKEUP GAIN
-40–
0
–40dB
Adjusts the final output volume after applying the compressor.
EQUALIZER
OFF
, ON
Turns the equalizer on/off.
Effect Adjusts the tone for each frequency band.
Hi GAIN
-15.0–
0.0
–15.0dB
Boosts or attenuates the high band.
Hi FREQUENCY
1.0–
10.0
–20.0kHz
Specifies the center frequency when changing the tone in the high band.
Mid GAIN
-15.0–
0.0
–15.0dB
Boosts or attenuates the middle band.
Mid FREQUENCY
20.0–
500Hz
–20.0kHz
Specifies the center frequency when changing the tone in the middle band.
Mid Q
0.5–
1.0
–16.0
Adjusts the width of the frequency band when boosting or attenuating the middle band.
Lo GAIN
-15.0–
0.0
–15.0dB
Boosts or attenuates the low band.
Lo FREQUENCY
20.0–
500Hz
–20.0kHz
Specifies the center frequency when changing the tone in the low band.
