Roland V-8HD, Reference Manual

Page: 16 / 110

16
Video Operations
1 .
Use the [MODE] button to select “AUX.”
The AUX/PinP SOURCE/MEMORY [1]–[8] buttons function as AUX-
bus selection buttons.
2 .
Press an AUX [1]–[8] button to select the AUX-bus
video.
The AUX output is switched.
MEMO
5
The display shows a green square (AUX indicator) for the input
channel that is being sent to the AUX bus.
5
For details on adjusting the volume of the AUX bus audio, refer
to “Adjusting the output volume of the AUX bus” (p. 34).
5
If the DSK mode is set to “alpha key” (p. 27) or “external key”
(p. 28), the same video that’s sent to the PGM bus is also sent
to the AUX bus.
* This disables the AUX [1]–[8] button selection (the buttons
go dark).
The colors of lighted AUX [1]–[8] buttons
When the [MODE] button is lighted in green, the AUX [1]–[8] buttons
also function as indicators showing the status of video input.
Button Explanation
Lit white Valid video is being input.
Blink white
Video whose format differs from the system format
setting is input.
Unlit
No video is input.
Sending the same video as the PGM output to the
AUX output
By using the AUX link function, you can send the same video as the
PGM bus (the final output video) to the AUX bus.
1 .
Press the [MENU] button
0
”SYSTEM”
0
select
“AUX LINKED PGM,” and press the [VALUE] knob.
2 .
Use the [VALUE] knob to select “AUTO LINK” or
“MANUAL LINK,” and press the [VALUE] knob.
If you’re not using the AUX link function, turn this “OFF.”
3 .
Press the [MENU] button to quit the menu.
Selecting the AUX output
In the case of “OFF”
Press an AUX [1]–[8] button to select the video of the AUX bus.
In the case of “AUTO LINK” or “MANUAL LINK”
AUX link is enabled, and the same video as the PGM bus is sent to the
AUX bus.
Temporarily disabling AUX link
When you press an AUX [1]–[8] button, the selection of the AUX [1]–
[8] button is enabled (lit green).
Re-enabling AUX link
AUTO LINK
When you operate the [AUTO] button etc. to switch the
video of the PGM bus, AUX link is automatically enabled.
MANUAL LINK
When you press the AUX/MEMORY button that is currently
selected (lit green), AUX link is enabled.
Switching AUX Output
You can use button operations to directly select the video to send to the AUX bus.