25
Connecting External Equipment
Connect to an RGB/COMPONENT OUT connector or to a DVI-D/HDMI OUT connector, depending on the input connector on the
projector.
fig.connect-projector.eps
Connect recording equipment such as video decks to the SD OUT connector or to an SDI OUT connector.
* NTSC or PAL video is output from the SD OUT connector, irrespective of the setting for output format on the V-800HD.
fig.connect-recorder.eps
The V-800HD is equipped with two D-Sub 15-pins TALLY connectors. Connecting a video monitor capable of tally input to these
makes it possible to illuminate the tally lamps on the monitor. The lamp is switched on and off according to the channel selection,
enabling you to see which channel is currently in use on the monitor.
* The specifications of TALLY connectors are as below.
• D-sub 15-pin type, max input: 12 V/200 mA
• Open-collector type
The channels shown below are assigned to the TALLY 1 and 2 connectors on the V-800HD.
fig.tally-assign.eps
Connecting Output Equipment
Connecting a Projector
Connecting Recording Equipment
Tally Output
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
Pin No.
Channel
PGM Ch.1
PST Ch.1
NC
GND
PGM Ch.4
PGM Ch.2
PST Ch.2
NC
GND
PST Ch.4
PGM Ch.3
PST Ch.3
NC
GND
NC
TALLY 1
TALLY 2
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
Pin No.
Channel
PGM Ch.5
PST Ch.5
NC
GND
PGM Ch.8
PGM Ch.6
PST Ch.6
NC
GND
PST Ch.8
PGM Ch.7
PST Ch.7
NC
GND
NC
Female Connector
