39
Other Features
Initializing a Preset Memory
Here’s how you can initialize the settings of a specific preset memory
to the factory-set condition.
1
[MENU] button
0
“PRESET MEMORY”
0
select “INITIALIZE,”
and press the [VALUE] knob.
2
Use the [VALUE] knob to select the preset memory
(MEMORY 1–8) that you want to initialize, and press the
[VALUE] knob.
A confirmation message appears.
* If you want to cancel the operation, press the [MENU] button.
3
Use the [VALUE] knob to select “YES,” and press the
[VALUE] knob.
The preset memory is initialized. When the operation is finished,
the message “COMPLETE” appears.
4
Press the [MENU] button several times to close the menu.
Formatting a USB Flash Drive
The first time that you use a USB flash drive, you must use this unit to
format it.
NOTE
5
A USB flash drive that was not formatted by this unit will not
be recognized.
5
Never turn off the power or remove the USB flash drive while
the message “PLEASE WAIT” is shown.
5
When you format a USB flash drive, all data on that USB flash
drive is erased. If the drive contains important data, back it up
to your computer before you format the drive.
1
Connect the USB flash drive to the USB MEMORY port.
* Ensure that the USB flash drive is oriented
correctly, and insert it all the way into the port.
Do not use excessive force.
2
[MENU] button
0
“USB MEMORY”
0
select “FORMAT,”
and press the [VALUE] knob.
A confirmation message appears.
* If you want to cancel the operation, press the [MENU] button.
3
Use the [VALUE] knob to select “YES,” and press the
[VALUE] knob.
Formatting is executed. When the operation is finished, the
message “COMPLETE” appears.
4
Press the [MENU] button several times to close the menu.
